3M™ Particulate Filter 2138, GP2/GP3, with Nuisance Level Organic Vapour/Acid Gas Relief
3M ID: 70071486214
Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. **Nuisance Levels are those levels below the Workplace Exposure Standard (WES).
Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: - With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) - With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES - Organic compounds with low vapour pressures - Ozone up to 10 x WES - Offers relief from acid gases and organic vapours at levels below the WES
- Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure
- Made from 3M high performance filter media for effective filtration efficiency
- Lightweight and provides low breathing resistance
- Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series
